Safety And Performance Information - Cisco 7920 - Unified Wireless IP Phone VoIP Administration Manual

Installing the Cisco Wireless IP Phone 7920

Safety and Performance Information

Warning
Warning
Warning
Warning
Warning
Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 4.0 and 4.1
3-14
Review the following warnings before installing the Cisco IP Phone. To see
translations of these warnings, refer to the Regulatory Compliance and Safety
Information for the Cisco Wireless IP Phone 7920 document that accompanied
this device.
This warning symbol means danger. You are in a situation that could cause
bodily injury. Before you work on any equipment, be aware of the hazards
involved with electrical circuitry and be familiar with standard practices for
preventing accidents. Use the statement number provided at the end of each
warning to locate its translation in the translated safety warnings that
accompanied this device. Statement 1071
Read the installation instructions before connecting the system to the power
source. Statement 1004
This equipment will not be able to access emergency services during a power
outage because of reliance on utility power for normal operation. Alternative
arrangements should be made for access to emergency services. Access to
emergency services can be affected by any call-barring function of this
equipment.
Do not use the Cisco Wireless IP Phone 7920 in hazardous environments such
as areas where high levels of explosive gas may be present. Check with the site
safety engineer before using any type of wireless device in such an
environment.
The plug-socket combination for the battery charger must be accessible at all
times, because it serves as the main disconnecting device. Statement 1019
Chapter 3 Setting Up Cisco Wireless IP Phones
OL-7104-01