Performing A Trace Route - Cisco 7920 - Unified Wireless IP Phone VoIP Administration Manual

Administration Options on the Phone Menus
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7

Performing a Trace Route

Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 4.0 and 4.1
9-24
You can also set these from the Cisco CallManager Administration in the Phone
Configuration page, where you can use the Product Specific Configuration
Options. The settings in the Cisco CallManager configuration file override the
settings on the phone. For more information, see the
Templates" section on page
To set the softkey settings option, follow these steps:
Procedure
Press the Menu softkey.
Choose the Phone Settings menu.
Scroll to Softkey Setting and press Select to open the Softkey menu.
Scroll to Idle and press Select to choose the softkey that displays on the idle
screen.
Scroll to one of the following: PhBook or Services and press Select.
A check mark appears next to the selected option. Press Back.
Scroll to CallUp and press Select to choose the softkey that displays when
connected to a call.
Scroll to one of the following: Mute or Softkey from CM and press Select.
When you select the "Softkey from CM" option, the softkeys display according to
the softkey template assigned to the phone. For more information, see the
Configuring Softkey Templates, page
You can use this function to trace the path of a packet from the phone to
Cisco CallManager. The result shows the number of hops and the IP address of
each hop to reach the Cisco CallManager server.
Chapter 9 Troubleshooting the Cisco Wireless IP Phone 7920
7-8.
7-8.
"Configuring Softkey
OL-7104-01