Cisco 7920 - Unified Wireless IP Phone VoIP Administration Manual page 130

Configuring Network Profile Settings
Step 3
Step 4
Step 5
Configuring Static Settings
Note
Step 1
Step 2
Step 3
Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 4.0 and 4.1
5-6
Chapter 5
Scroll to DHCP Enable/Disable and press Select.
Scroll to Enable or Disable and press Select.
A check mark appears next to the selected option.
Press Back to exit the menu.
Related Topic
Configuring Static Settings, page 5-6
•
When DHCP is disabled in the network, you must configure the following settings
in the Static Settings menu:
IP address
•
Subnet mask
•
Primary Gateway
•
Primary TFTP server
•
DNS servers (Primary and Secondary)
•
Use these guidelines when manually configuring the IP settings:
Ensure the TFTP server has an IP address.
•
Ensure the default gateway IP address is on the same subnet as the host IP
•
address.
Procedures involved in configuring IP settings or the TFTP option cannot be
completed when DHCP is enabled in your network.
Procedure
Choose Menu > Profiles > Network Profile.
Scroll to the profile name that you want to configure and press Select.
Choose DHCP Enable/Disable > Static Settings and press Select.
Configuring Network Profiles on the Cisco Wireless IP Phone 7920
OL-7104-01