Troubleshooting Executive Assistant Settings; Wi-Fi Settings; Connect The Phone To A Wireless Network At The First Boot - Cisco 8800 Series User Manual

Settings
If your administrator configures more than one assistant on the phone, then the screen only displays the
executives of the first available assistant.

Troubleshooting Executive Assistant Settings

Calls Fail Although Call Diversion Is On
Ensure that DND is not activated for your extension.

Wi-Fi Settings

Wi-Fi settings are available only on Cisco IP phone 8861 and 8865 Multiplatform Phones.
You can customize Wi-Fi settings for your phone from the Wi-Fi configuration menu under the Network
configuration menu on the phone. Some of the Wi-Fi settings are also available on the phone web page.

Connect the Phone to a Wireless Network at the First Boot

The phone automatically scans for available Wi-Fi networks in any of the following situations:
• when the phone first boots up without a network connection.
• when the phone isn't connected to a network after a factory reset.
A list of available Wi-Fi networks is displayed after the Wi-Fi scan process completes.
Procedure
Step 1
Select a Wi-Fi network from the list.
You see the following options:
• Scan—The phone scans again for available networks.
• Setup—Opens the Setup Wi-Fi page.
• Skip—You see the message If you skip this step, you will need to configure
Step 2
Press Setup and complete the fields.
Step 3 Press Connect.
the network manually. If you confirm to skip the Connect to Wi-Fi page, the Wi-Fi Scan softkey
displays.
Troubleshooting Executive Assistant Settings
Cisco IP Phone 8800 Series Multiplatform Phones User Guide
147