File Format Or File Access Errors - Cisco 7920 - Unified Wireless IP Phone VoIP Administration Manual

Cisco 7920 Configuration Utility Troubleshooting Tips

File Format or File Access Errors

Table 9-4 File Format or File Access Errors
Error Code Possible Problem
ERR200 Disk is full, or allocation limit has
been exceeded.
ERR201 Unknown setting parameter in
configuration file.
ERR202 Setting value is not available in
configuration file.
ERR203 No equals sign (=) between setting
parameter and setting value.
ERR204 Firmware image checksum error.
ERR205 Incorrect firmware image version. The firmware image version should be available for
ERR206 Errors in writing firmware image
into Flash memory.
ERR207 Improper firmware image file size. Check that the firmware image version is correct for
Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 4.0 and 4.1
9-30
Table 9-4 lists error codes, possible problems, and possible solutions for the
configuration file format or file access errors when working with the Cisco 7920
Configuration Utility.
For information about the configuration file, see the
Template" section on page
Chapter 9 Troubleshooting the Cisco Wireless IP Phone 7920
4-35.
Possible Solution
Free up disk space for saving files on the computer.
If this is a new setting parameter, you can click the
Skip button to ignore format checking in the
Unknown Setting Window.
You can also click the Delete button to delete this
setting parameter in the Unknown Setting Window.
Look for the missing value in the configuration file
and make the correction.
Add an equals sign (=) between the setting
parameter and the setting value.
Upload the firmware image again, or check to see
whether the firmware image is correct.
the current Cisco Wireless IP Phone 7920. Upload
the correct version of the firmware image file for
your phone.
Power on the Cisco Wireless IP Phone 7920 again.
Contact TAC if the error remains.
the Cisco Wireless IP Phone 7920 model.
"Creating a Configuration
OL-7104-01