Configuring Network Features For The Cisco Wireless Ip Phone - Cisco 7920 - Unified Wireless IP Phone VoIP Administration Manual

Chapter 1 An Overview of the Cisco Wireless IP Phone 7920

Configuring Network Features for the Cisco Wireless IP Phone

Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 4.0 and 4.1
OL-7104-01
For more information about the Cisco CallManager Administration application,
refer to Cisco CallManager documentation, including Cisco CallManager
Administration Guide. You can also use the context-sensitive help that is available
within the application. Access context-sensitive help by choosing 
Help > For this screen from the main menu bar.
You can access the complete Cisco CallManager documentation for your version
at this location:
http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/index.htm
Related Topic
Adding Phones to the Cisco CallManager Database, page 3-7
•
Configuring Features, Templates, Services, and Users, page 7-1
•
Like other network devices, you must configure IP phones to access Cisco
CallManager and the rest of the IP network. There are two methods for
configuring network features such as DHCP, TFTP, and IP settings and wireless
settings for the phone.
• Cisco 7920 Configuration Utility
Network Config menu on the Cisco Wireless IP Phone 7920
•
You install the Cisco 7920 Configuration Utility on a computer and connect to the
Cisco Wireless IP Phone 7920 with a USB cable to configure phone and network
settings. For more information, see
Configuration Utility."
You can also configure network settings on the phone itself. For more information
about configuring features from the phone, see
Profile Settings".
Related Topics
Using the Cisco 7920 Configuration Utility, page 4-1
•
Configuring Network Profile Settings, page 5-3
•
Features Supported on the Cisco Wireless IP Phone 7920
Chapter 4, "Using the Cisco 7920
Chapter 5, "Configuring Network
1-5