Configuring Video Surveillance (Cisco Spa525G Or Cisco Spa525G2) - Cisco 521SG - Unified IP Phone VoIP Administration Manual

Customizing Standard Features

Configuring Video Surveillance (Cisco SPA525G or Cisco SPA525G2)

STEP 3
STEP 4
Configuring Video Surveillance (Cisco SPA525G or
Cisco SPA525G2)
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
In the EM User Domain field, enter the domain for the phone, or the authentication
server. For example, @domain.com, which is appended to the user ID
(userID@domain.com) for authentication to the HTTP server.
Click Submit All Changes. The phone reboots.
You must also configure the Extension Mobility parameters in the profile rule field
in the Provisioning tab. See the Provisioning Parameters for Extension Mobility on
Cisco SPA500 Series IP Phones application note at:
https://www.myciscocommunity.com/docs/DOC-11277
For more information on extension mobility and BroadSoft, see
http://www.broadsoft.com.
The Cisco SPA525G or Cisco SPA525G2 provides a simple video surveillance
solution for a small business office. It works with the Cisco WVC2300 Wireless-G
Business Internet Video Camera and the Cisco PVC2300 Business Internet Video
Camera to provide simple video monitoring from your IP phone of a location such
as a lobby entrance or doorway. Up to four cameras can be monitored from one IP
phone.
Camera audio is not supported.
The Cisco SPA525G or Cisco SPA525G2 connects to the videocamera and
provides a real-time video stream display from the camera. Storage and
manipulation of video and physical camera control are not available from the IP
phone.
The IP phone supports the camera display at a rate of two to three frames per
second with good video quality. However, video quality can degrade if the camera
is processing multiple streaming sessions, there is heavy Wi-Fi network traffic, or
the IP phone is performing other processing. To avoid degrading voice audio
quality on a call, the frame rate decreases to one frame per second if a codec
other than G.711 is used for a call or when the user accesses the video monitoring
page during a call.
3
95