Configuring Linksys Key System Parameters - Cisco 521SG - Unified IP Phone VoIP Administration Manual

Customizing Standard Features

Configuring Linksys Key System Parameters

STEP 3
STEP 4
Configuring Linksys Key System Parameters
STEP 1
STEP 2
STEP 3
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
In the Back Light Timer field, enter the number of seconds of idle time that can
elapse before the back light turns off.
Click Submit All Changes.
To configure the phone as part of a Linksys Key System (for use with the
Cisco SPA9000):
Click Admin Login > advanced > Voice > SIP.
Under Linksys Key System Parameters, configure the following fields:
Linksys Key System—Enables or disables the Linksys Key System for use
•
with the Cisco SPA9000. Defaults to yes. See the Cisco SPA9000
Administration Guide
Multicast Address—Used by the Cisco SPA9000 to communicate with
•
Cisco SPA IP phones. Defaults to 224. 1 68. 1 68. 1 68:6061. (The
Cisco SPA501G, can be configured by using the IVR. See the
IP Phones Without Screens" section on page
Key System Auto Discovery—Enables or disables auto discovery of the call
•
control server (for example, the Cisco SPA9000). Disable this feature for
teleworkers or other scenarios where multicast does not work.
Key System IP Address—IP address of the call control server IP. Enter the IP
•
address for teleworkers or other scenarios where multicast does not work.
Force LAN Codec—Used with the Cisco SPA9000. Choices are none,
•
G.711u, or G.711a. Defaults to none.
Click Submit All Changes.
for more details.
System
"Using IVR on
26.)
3
54