Chapter 5: Using The Web Configuration Utility; Logging In To The Phone Web User Interface; Cisco Spa525G And Cisco Spa525G2 Sip Ip Phone User Guide - Cisco SPA525G User Manual

Using the Web Configuration Utility

Logging in to the Phone Web User Interface

STEP 1
Cisco SPA525G and Cisco SPA525G2 SIP IP Phone User Guide
Your Cisco IP Phone provides a web interface for the phone user that allows you to
configure some features of your phone by using a web browser. Your phone
system administrator can allow you to view the phone statistics and modify some
or all of the parameters by using the phone web user interface. The features of the
Cisco SPA phones that can be modified by the user by using the phone web user
interfaceare described in this chapter; however, not all features are available on all
phones.
This chapter contains the following sections:
• Logging in to the Phone Web User Interface, page 83
• Configuring Your Personal Address Book, page 85
• Configuring Voice User Parameters, page 87
• Viewing Call History Lists, page 90
• Creating Speed Dials, page 91
• Configuring Wi-Fi, page 92
• Configuring Bluetooth, page 93
• Upgrading Firmware, page 94
To log into the phone web user interface:
Get the IP address of your phone:
a. Press Setup.
b. Select to Status > Network Status.
c. Scroll to view IP Address. This is the IP address of your phone.
5
83