Configuring Ring Tones - Cisco 521SG - Unified IP Phone VoIP Administration Manual

Customizing Standard Features

Configuring Ring Tones

Configuring Ring Tones
STEP 1
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
You can define up to 12 ring tones for a Cisco SPA300 Series or Cisco SPA500
Series IP phone. In addition to these 12 ring tones, 4 user-configurable ring tones
can be used in place of some of the default ring tones. See
Tone (Cisco SPA300 Series and Cisco SPA500 Series),"
about ring tones.
Cisco WIP310 ring tones are not configurable from the phone web user interface.
You can define:
• The default ring tone for the extension
• Specific ring tones assigned to individual callers in the personal directory.
These override the default ring tone.
To configure ring tones:
Click Admin Login > advanced > Voice > Phone and scroll to the Ring Tone
section.
Configure the characteristics of each ring tone by using a Ring Tone script.
Specify:
• Name (n)—Ring tone name, such as Classic, Simple, or Office
• Waveform (w):
- (Not supported on the Cisco SPA300 Series or Cisco SPA5XXG.)
- (Cisco SPA525G or Cisco SPA525G2) 1, 2, 3, 4, file://Pulse1.raw, file://
Ring7.raw, file://Warble.raw, w=file://Low.raw, file://Floor.raw, file://
Reverb.raw
• Cadence (c)—1, 2, 3, 4, or 5 (Not supported on the Cisco SPA300 Series or
Cisco SPA5XXG.)
You can also use the configuration file to configure a ring tone. For example, to
configure Ring1 to play the Warble ring tone, change the Ring1 parameter as
follows
• Cisco SPA300 Series or Cisco SPA5XXG
<Ring1 ua="na">n=warble;w=7;c=1</Ring1>
• (Cisco SPA525G or Cisco SPA525G2)
3
Appendix A, "Ring
for more information
68