Cisco 521SG - Unified IP Phone VoIP Administration Manual page 312

Cisco SPA IP Phone Field Reference
Ext Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Parameter
Dial Plan
Caller ID Map
Enable IP Dialing
Description
Dial plan script for this line.
The default is (<9:>xx.)
(*xx|[3469]11|0|00|[2-
9]xxxxxx|1xxx[2-
9]xxxxxxS0|xxxxxxxxxxxx.)
The dial plan syntax is expanded in the Cisco SPA
IP phones to allow the designation of three
parameters to be used with a specific gateway:
• uid— authentication user-id
• pwd—authentication password
• nat— if this parameter is present, use NAT
mapping
Each parameter is separated by a semi-colon (;).
Inbound caller ID numbers can be mapped to a
different string. For example, a number that begins
with +44xxxxxx can be mapped to 0xxxxxx. This
feature has the same syntax as the Dial Plan
parameter. With this parameter, you can specify
how to map a caller ID number for display on
screen and recorded into call logs. (Not applicable
to Cisco WIP310.)
Enable or disable IP dialing.
Defaults to no.
A
311