Configuring Audio Input Gain (Cisco Spa300 Series And Cisco Spa500 Series); Enabling Wireless (Cisco Spa525G Or Cisco Spa525G2 Only) - Cisco 521SG - Unified IP Phone VoIP Administration Manual

Customizing Standard Features

Enabling Wireless (Cisco SPA525G or Cisco SPA525G2 only)

Enabling Wireless (Cisco SPA525G or Cisco SPA525G2 only)
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Configuring Audio Input Gain (Cisco SPA300 Series and
Cisco SPA500 Series)
The value on the handset, headset, or speakerphone parameters default to zero,
indicating that the volume is set to a base level. This does not mean that the sound
is turned off; it is set to a level the average person can hear in a normal office
environment.
To amplify or reduce the sound level, navigate to Admin Login > advanced >
Voice > Phone. Under Audio Input Gain (dB), choose the item to configure:
• A positive value increases amplification (sound is louder).
• A negative value decreases amplification (sound is quieter).
• Set a value that is loud enough to hear clearly without producing echo (an
indication that the input gain is too high).
The Cisco SPA525G or Cisco SPA525G2 provides a Wireless-G interface. If a
wired link is connected to the phone, the wireless connection is automatically
disabled.
To enable wireless communications, navigate to Admin Login > advanced > Voice
> System. Under Wi-Fi Settings, in the SPA525-wifi-on field, choose yes to enable
or no to disable.
3
75