Cisco 521SG - Unified IP Phone VoIP Administration Manual page 250

Cisco SPA IP Phone Field Reference
Regional Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Parameter
Reorder Tone
Off Hook Warning Tone
Ring Back Tone
Call Waiting Tone
Call Pickup Tone
Confirm Tone
SIT1 Tone
Description
Played when an outbound call has failed or after
the far end hangs up during an established call.
Reorder Tone is played automatically when <Dial
Tone> or any of its alternatives times out.
Defaults to 480@-19,620@-19;10(.25/.25/1+2).
Played when the caller has not properly placed
the handset on the cradle. Off Hook Warning Tone
is played when Reorder Tone times out.
Defaults to 480@10,620@0;10(. 1 25/. 1 25/1+2).
Played during an outbound call when the far end
is ringing.
Defaults to 440@-19,480@-19;*(2/4/1+2).
Played when a call is waiting. Defaults to
440@-10;30(.3/9.7/1)
The default value for this parameter is
440@-10;30(.3/9.7/1), which is the same as the call
waiting tone.
This feature appears as follows in the phone
configuration file:
<Call_Pickup_Tone ua="na">440@-10;30(.3/9.7/
1)</Call_Pickup_Tone>
Brief tone to notify the user that the last input
value has been accepted.
Defaults to 600@-16; 1(.25/.25/1).
Alternative to the Reorder Tone played when an
error occurs as a caller makes an outbound call.
The RSC to trigger this tone is configurable on
theIP phone screen.
Defaults to 985@-16,1428@-16,1777@-16;20(.380/
0/1,.380/0/2,.380/0/3,0/4/0).
A
249