Configure The Web Server From The Phone Screen Interface; Configuring Ldap For The Cisco Spa300 Series And Cisco Spa500 Series Ip Phones - Cisco 521SG - Unified IP Phone VoIP Administration Manual

Customizing Standard Features

Configuring LDAP for the Cisco SPA300 Series and Cisco SPA500 Series IP Phones

STEP 7
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Configuring LDAP for the Cisco SPA300 Series and
Cisco SPA500 Series IP Phones
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Click Submit All Changes.

Configure the Web Server from the Phone Screen Interface

To enable the phone web user interface from the Phone tab (does not apply to the
Cisco WIP310):
Press menu.
Select Network and Enable Web Server.
Select the Edit.
Press y/n to toggle the selection to Yes and enable.
Click OK > Save.
The Cisco SPA300 Series and Cisco SPA500 Series IP phones support
Lightweight Directory Access Protocol (LDAP) v3. LDAP Corporate Directory
Search allows a user to search a specified LDAP directory for a name, phone
number, or both. LDAP-based directories, such as Microsoft Active Directory 2003
and OpenLDAP-based databases, are supported. (LDAP is not supported on the
Cisco WIP310.)
Users access LDAP from the Directory menu on their IP phone. There is a limit of
20 records returned from a LDAP search.
The instructions in this section assume you have the following equipment and
services:
• A LDAP server, such as OpenLDAP or Microsoft Active Directory Server
2003
• A Cisco SPA300 Series or Cisco SPA500 Series IP phone running firmware
version 6. 1 .3a or higher
3
83