Optional Network Configuration - Cisco 521SG - Unified IP Phone VoIP Administration Manual

Cisco SPA IP Phone Field Reference
System Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide

Optional Network Configuration

Parameter
Host Name
Domain
Primary DNS
Secondary DNS
DNS Server Order
DNS Query Mode
Syslog Server
Debug Server
Description
The host name of the SPA9000.
The network domain of the SPA9000.
DNS server used by SPA9000 in addition to DHCP
supplied DNS servers if DHCP is enabled; when
DHCP is disabled, this is the primary DNS server.
Defaults to 0.0.0.0.
DNS server used by SPA9000 in addition to DHCP
supplied DNS servers if DHCP is enabled; when
DHCP is disabled, this is the secondary DNS
server.
Defaults to 0.0.0.0.
Specifies the method for selecting the DNS
server. The options are Manual, Manual/DHCP, and
DHCP/Manual.
Do parallel or sequential DNS Query. With parallel
DNS query mode, the SPA9000 sends the same
request to all the DNS servers at the same time
when doing a DNS lookup, the first incoming reply
is accepted by the SPA9000.
Defaults to parallel.
Specify the syslog server name and port. This
feature specifies the server for logging IP phone
system information and critical events. If both
Debug Server and Syslog Server are specified,
Syslog messages are also logged to the Debug
Server.
The debug server name and port. This feature
specifies the server for logging IP phone debug
information. The level of detailed output depends
on the debug level parameter setting.
A
226