Response Status Code Handling - Cisco 521SG - Unified IP Phone VoIP Administration Manual

Cisco SPA IP Phone Field Reference
SIP Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide

Response Status Code Handling

Parameter
SIT1 RSC
SIT2 RSC
SIT3 RSC
SIT4 RSC
Try Backup RSC
Retry Reg RSC
Description
SIP response status code for the appropriate
Special Information Tone (SIT). For example, if you
set the SIT1 RSC to 404, when the user makes a
call and a failure code of 404 is returned, the SIT1
tone is played. Reorder or Busy Tone is played by
default for all unsuccessful response status code
for SIT 1 RSC through SIT 4 RSC.
Defaults to blank.
SIP response status code to INVITE on which to
play the SIT2 Tone.
Defaults to blank.
SIP response status code to INVITE on which to
play the SIT3 Tone.
Defaults to blank.
SIP response status code to INVITE on which to
play the SIT4 Tone.
Defaults to blank.
SIP response code that retries a backup server
for the current request.
Defaults to blank.
Interval to wait before the SPA9000 retries
registration after failing during the last registration.
Defaults to blank.
A
238