Cisco SPA IP Phone Field Reference
Phone Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
In addition to these two ring tones, four user-configurable ring tones were added:
Label
Value of the w Parameter
Warble
(Cisco SPA300 Series and Cisco SPA500 Series)
w=7
((Cisco SPA525G or Cisco SPA525G2))
w=file://Warble.raw
Low
(Cisco SPA300 Series and Cisco SPA500 Series)
w=8
((Cisco SPA525G or Cisco SPA525G2))
w=file://Low.raw
Floor
(Cisco SPA300 Series and Cisco SPA500 Series)
w=9
((Cisco SPA525G or Cisco SPA525G2))
w=file://Floor.raw
Reverb
(Cisco SPA300 Series and Cisco SPA500 Series)
w=10
((Cisco SPA525G or Cisco SPA525G2))
w=file://Reverb.raw
These four ring tones must be provisioned or configured by using the phone web
user interface.
Ring Tone (Cisco WIP310)
Parameter
Keypad Tone
Keypad Tone Volume
Description
Select yes to enable the keypad tone to be
played when a key on the keypad is pressed.
Select no to silence the keypad.
Corresponds to the volume of the keypad tone.
Default is 5.
A
281