Cisco 521SG - Unified IP Phone VoIP Administration Manual page 85

Customizing Standard Features
Configuring LDAP for the Cisco SPA300 Series and Cisco SPA500 Series IP Phones
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
To prepare the LDAP Corporate Directory Search:
Click Admin Login > advanced > System.
In the Optional Network Configuration section, under Primary DNS, enter the IP
address of the DNS server. (Only required if using Active Directory with
authentication set to MD5.)
In the Optional Network Configuration section, under Domain, enter the LDAP
domain. (Only required if using Active Directory with authentication set to MD5.)
Some sites might not deploy DNS internally and instead use Active Directory
2003. In this case, it is not necessary to enter a Primary DNS address and an LDAP
Domain. However, with Active Directory 2003, the authentication method is
restricted to Simple.
Click the Phone tab.
Under LDAP, in the LDAP Dir Enable field, choose yes to enable LDAP and cause
the name defined in LDAP Corp Dir Name to appear in the phone directory.
Configure values for the fields in the following table and click Submit All Changes.
Parameter
LDAP Corp Dir Name
LDAP Server
Description
Enter a free-form text name, such as Corporate
Directory.
Enter a fully qualified domain name or IP address of
LDAP server, in the format nnn.nnn.nnn.nnn.
Enter the host name of the LDAP server if the MD5
authentication method is used.
3
84