Configuring Call Park On The Cisco Spa525G Or Cisco Spa525G2 (Metaswitch) - Cisco 521SG - Unified IP Phone VoIP Administration Manual

Configuring Lines
Configuring a Line Key
STEP 3
STEP 1
STEP 2
STEP 3
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
• type:
- xml: pressing the line button accesses XML services. The XML service
configured on the Phone tab under the launches the page identified in
the XML Service field (see
a different XML service to connect to by using the syntax
fnc=xml;URL=http://xxx.xx.xxx/entry.html
where xxx.xx.xxx is the URL of the XML service.
- mp3: pressing the line button starts the mp3 player.
- weather: pressing the line button accesses weather information.
- news: pressing the line button accesses news.
For example, to configure line 4 for the mp3 player:
fnc=mp3
Click Submit All Changes. After the phone reboots, configured lines glow orange
and display the following icons next to the extension label:
• xml: XML icon
• mp3: mp3 player icon (Cisco SPA525G or Cisco SPA525G2)
• news: RSS icon
• weather: thermometer icon
Configuring Call Park on the Cisco SPA525G or
Cisco SPA525G2 (MetaSwitch)
Unused line keys can be enabled to allow call park (for the MetaSwitch soft switch)
on the Cisco SPA525G or Cisco SPA525G2. Users can press this line button to
park a call or retrieve a parked call.
To configure unused line keys for call park and retrieval:
Click Admin Login > advanced > Voice > Att(endant) Console.
In the General section under Server Type, choose RFC3265_4236.
Click the Phone tab.
Configuring XML Services). You can specify
2
42