Initiating Pairing From The Cisco Spa525G2 - Cisco 521SG - Unified IP Phone VoIP Administration Manual

Customizing Standard Features
Configuring Bluetooth (Cisco SPA525G or Cisco SPA525G2 only)
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
STEP 8
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
For more detailed instructions, see the
Cisco SPA525G2 IP Phone User Guides
To pair your Cisco SPA525G2 with your Bluetooth-enabled mobile phone, you can
either initiate pairing from the Cisco SPA525G2, or from your mobile phone.

Initiating Pairing from the Cisco SPA525G2

Enable Bluetooth as described in
Press the Setup button.
Scroll to User Preferences and press Select.
Scroll to Bluetooth Configuration and press Select.
Scroll to Bluetooth Mode and press the Right Arrow key to choose one of the
following:
• Handsfree—Your Cisco SPA525G2 operates as a handsfree device with a
Bluetooth-enabled mobile phone.
Both—Your Cisco SPA525G2 operates with your Bluetooth-enabled mobile
•
phone or operate with a Bluetooth headset. The Cisco SPA525G2 connects
to only one device at a time (either the Bluetooth headset or the Bluetooth-
enabled mobile phone.)
If multiple Bluetooth devices are in range of the Cisco SPA525G2, the order
of devices in the Bluetooth Configuration > Bluetooth Profiles list is used,
and the device with a higher priority is activated first.
Scroll to Bluetooth Profiles and press the Right Arrow key to enter the profile
screen.
Press Scan to scan for your mobile phone.
Depending on the network environment (such as the number of Bluetooth devices
and the noise level), your Bluetooth headset might not appear on the found
devices list. Ensure the headset is powered on and has Bluetooth activated, and
retry the Scan.
In the Select a Bluetooth Device to Pair list, select the mobile phone to which you
want to pair and press Connect.
Cisco Small Business Cisco SPA525G or
.
Enabling Bluetooth from the Web
3
Interface.
79