Cisco 521SG - Unified IP Phone VoIP Administration Manual page 171

Provisioning
Using TR-069
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Field Description
ACS URL Enter the URL of the ACS using the CPE WAN Management
Protocol. This parameter must be in the form of a valid HTTP
or HTTPS URL. The host portion of this URL is used by the
CPE to validate the ACS certificate when using SSL or TLS.
ACS Username Enter the username that authenticates the CPE to the ACS
by using the CPE WAN Management Protocol. This
username is used only for HTTP-based authentication of the
CPE.
ACS Password Enter the password grants access to the ACS for this user.
This password is used only for HTTP-based authentication
of the CPE.
ACS URL In Use Displays the ACS URL.
Connection Displays the ACS making the connection request to the
Request URL CPE.
Connection Enter the username that authenticates the ACS making the
Request connection request to the CPE.
Username
Connection Enter the password used to authenticate the ACS making a
Request connection request to the CPE.
Password
Periodic Inform The duration in seconds of the interval between CPE
Interval attempts to connect to the ACS when Periodic Inform
Enable is set to yes.
Periodic Inform From the drop-down menu, select yes to enable CPE
Enable connection requests. Enter no to disable connection
requests.
TR-069 From the drop-down menu, select yes to enable TR-069
Traceability transaction traceability. Enter no to disable traceability.
CWMP V1.2 From the drop-down menu, select yes to enable CPE WAN
Support Management Protocol (CWMP) support. Enter no to disable
CWMP support such that the device does not send any
Inform messages to the ACS or accept any connection
requests from the ACS.
6
170