Initiating Pairing From Your Bluetooth-Enabled Mobile Phone - Cisco 521SG - Unified IP Phone VoIP Administration Manual

Customizing Standard Features
Configuring Bluetooth (Cisco SPA525G or Cisco SPA525G2 only)
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 1
STEP 2
STEP 3
STEP 4
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide

Initiating Pairing from Your Bluetooth-Enabled Mobile Phone

The procedure varies depending on your phone model. The example in this
section uses an Apple iPhone.
Before starting, it is helpful to find the MAC address of your Cisco SPA525G2 IP
phone. From your IP phone, go to the Setup menu and select Status. Select
Product Information. The MAC address is displayed.
On your iPhone, click Settings.
Under General, choose Bluetooth. Ensure Bluetooth is turned on.
In the Bluetooth Window, under Devices, find the MAC address of your
Cisco SPA525G2 IP phone.
Select the MAC address of the Cisco SPA525G2.
Enter the PIN (the default is 0000) and press Connect.
When paired with your mobile phone, the Cisco SPA525G2 IP phone screen
assigns one of your line buttons to the mobile phone. A mobile phone icon with a
flashing lightning bolt icon is displayed next to the mobile phone number.
To verify the mobile phone configuration:
On the Cisco SPA525G2, press the Setup Button.
Scroll to User Preferences and press Select.
Scroll to Bluetooth Configuration and press Select.
Scroll to Bluetooth Profiles and press the Right Arrow key.
The mobile phone appears in the list of Bluetooth devices.
3
80