Line/Call Status - Cisco 521SG - Unified IP Phone VoIP Administration Manual

Cisco SPA IP Phone Field Reference
Info Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide

Line/Call Status

The following parameters show for each line and call on the phone.
Parameter
Call State
Tone
Encoder
Decoder
Type
Remote Hold
Callback
Peer Name
Peer Phone
Duration
Packets Sent
Packets Recv
Bytes Sent
Bytes Recv
Mapped RTP Port
Media Loopback
Decode Latency
Jitter
Description
Status of the call.
Type of tone used by the call.
Codec used for encoding.
Codec used for decoding.
Direction of the call.
Indicates whether the far end has placed the call
on hold.
Indicates whether the call was triggered by a call
back request.
Name of the internal phone.
Phone number of the internal phone.
Duration of the call.
Number of packets sent.
Number of packets received.
Number of bytes sent.
Number of bytes received.
The port mapped for Real Time Protocol traffic for
the call.
If the call is a loopback call, displays the loopback
mode (source or mirror) and type (media or
packet). If the call is not loopback, the field appears
blank.
Number of milliseconds for decoder latency.
Number of milliseconds for receiver jitter.
A
219