Multiple Paging Group Parameters - Cisco 521SG - Unified IP Phone VoIP Administration Manual

Cisco SPA IP Phone Field Reference
Phone Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide

Multiple Paging Group Parameters

You can configure a phone as part of a paging group by using a Group Paging
Script. Users can then direct pages to specific groups of phones. A phone can be
part of no more than two paging groups, and user can page a maximum of five
paging groups.
Syntax:
pggrp=ip-address:port;[name=xxx;]num=xxx;
[listen={yes|no}]];
Where:
IP address
: Multicast IP address of the phone that listens for and receives pages.
port
: Port on which to page; you must use different ports for each paging group.
name (optional): The name of the paging group. In this name, do not use the pggrp
string because it is reserved. Using it causes the script not to work, as in these
examples:
pggrp=224.168.168.168:3141;name=ITGPgGrp;
num=800;listen=yes;
pggrp=224.168.168.168:3141;name=PgGrp;num=800;listen=yes;
num: The number users dial to access the paging group; must be unique to the
group.
listen: If the phone should listen on the page group. Only the first two groups with
listen set to yes will listen to group pages. If the field is not defined, the default
value is no, so you must set this field to listen to the group pages.
A
283