Cisco 521SG - Unified IP Phone VoIP Administration Manual page 273

Cisco SPA IP Phone Field Reference
Phone Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Parameter
Select Background Picture
Softkey Labels Font
Screen Saver Enable
Screen Saver Wait
Description
Select from Default, BMP Picture, or None.
Defaults to Default.
NOTE Not applicable to the
Cisco SPA301, or Cisco SPA501G. On the
Cisco SPA525G or Cisco SPA525G2, this setting is
located on the User tab.
Choose the font width for the softkey labels to
display on your phone. See
Softkeys.
NOTE Not applicable to the
Cisco SPA301, or Cisco SPA501G.
Enables a screen saver on the IP phone screen.
When the phone is idle for a specified time, it
enters screen saver mode. (Users can set up
screen savers directly using phone Setup button.)
Any button press or on/off hook event triggers the
phone to return to its normal mode. (The screen
shows Press any key to unlock your
phone.) If a user password is set, the user must
enter it to exit screen saver mode.
NOTE Not applicable to the
Cisco SPA301, or Cisco SPA501G. On the
Cisco SPA525G or Cisco SPA525G2, this setting is
located on the User tab.
Amount of idle time before screen saver displays.
NOTE Not applicable to the
Cisco SPA301, or Cisco SPA501G. On the
Cisco SPA525G or Cisco SPA525G2, this setting is
located on the User tab.
A
Cisco WIP310
,
Customizing Phone
Cisco WIP310
,
Cisco WIP310
,
Cisco WIP310
,
272