Attendant Console Tab (Cisco Spa500 Series); General - Cisco 521SG - Unified IP Phone VoIP Administration Manual

Cisco SPA IP Phone Field Reference

Attendant Console Tab (Cisco SPA500 Series)

Attendant Console Tab (Cisco SPA500 Series)
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Parameter
LCD Contrast
Back Light Enable
Back Light Timer (sec)

General

Parameter
Subscribe Expires
Subscribe Retry Interval
Unit 1 Enable
Subscribe Delay
Unit 2 Enable
Server Type
Description
Enter a number value from 1 to 30. The higher the
number, the greater the contrast on the IP phone
screen.
Select yes to enable the IP phone screen back light.
Enter the number of seconds before the back light
should turn off.
Description
Specifies how long the subscription remains valid.
After the specified period of time, elapses, the
Cisco Attendant Console initiates a new
subscription.
Defaults to 1800.
Specifies the length of time to wait to try again if
subscription fails.
Enables or disables the first Cisco Attendant
Console unit (each IP phone can have up to two
Cisco Attendant Consoles attached).
Length of delay before attempting to subscribe.
Defaults to 1.
Enables or disables the second Cisco Attendant
Console unit (each IP phone can have up to two
Cisco Attendant Consoles attached).
Selects the type of server used (Cisco SPA9000,
BroadSoft, or Asterisk).
A
316