Configuring Audio Indication For Call Pickup Event - Cisco 521SG - Unified IP Phone VoIP Administration Manual

Configuring Lines

Configuring Audio Indication for Call Pickup Event

Configuring Audio Indication for Call Pickup Event
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
You can configure the phone to play the Call Pickup tone when there are incoming
calls to any of the lines that the user is monitoring with the Call Pickup function.
To configure Audio Indication:
Click Admin Login > advanced > Voice > Att(endant) Console.
In the General section under Call Pickup Audio Notification, select Yes,
To configure this parameter by using the configuration file, configure the following
line to the profile:
<Call_Pickup_Audio_Notification ua="na">Yes
</Call_Pickup_Audio_Notification>
Click the Regional tab.
In the Call Progress Tones section under the Call Pickup Tone parameter.
The default value is 440@-10;30(.3/9.7/1), same as the call waiting tone.
To configure this parameter by using the configuration file, configure the following
line the profile:
<Call_Pickup_Tone ua="na">440@-10;30(.3/9.7/1)</Call_Pickup_Tone>
Click Submit All Changes.
2
46