Viewing Phone Information; Viewing Reboot Reasons - Cisco 521SG - Unified IP Phone VoIP Administration Manual

Getting Started

Viewing Phone Information

Viewing Phone Information
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
You can check the current status of the Cisco SPA IP phones by clicking the Info
tab. The Info tab shows information about all phone extensions, including phone
statistics and the registration status.

Viewing Reboot Reasons

The phone stores the most recent five reasons the phone was refreshed or
rebooted. When the phone is reset to factory defaults, this information is deleted.
The list describes the reboot and refresh reasons (Cisco SPA300 Series and
Cisco SPA500 Series IP phones).
Reason
DHCP Failed
Upgrade
Provisioning
SIP Triggered
Link Down
VLAN Changed
RC
User Triggered
Software Req
Description
The reboot was the result of a DHCP error caused
when the lease expired, or when the renewal or
verification failed.
The reboot was a result of an upgrade operation
(regardless whether the upgrade completed or
failed).
The reboot was the result of changes made to
parameter values by using the IP phone screen or
phone web user interface, or as a result of
synchronization.
The reboot was triggered by a SIP request.
The reboot was triggered when the link to the
network went down.
The reboot was triggered when the VLAN was
changed.
The reboot was triggered as a result of remote
customization.
The user manually triggered a warm reboot.
The warm reboot was triggered by a remote server.
1
24