Configuring The Message Waiting Indicator - Cisco 521SG - Unified IP Phone VoIP Administration Manual

Customizing Standard Features

Configuring the Message Waiting Indicator

STEP 4
Configuring the Message Waiting Indicator
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
• Off Hook Key List: Edit the field to add psk1| 1 to the beginning of the string;
for example:
psk1|1;option;redial;dir;cfwd;dnd;lcr;unpark;pickup;
gpickup;
• Connected Key List: Edit the field to add psk1| 1 to the string, editing the
softkeyname
existing
hold|1;endcall|2;conf|3;xfer|4;bxfer;confLx;xferLx;park;p
hold;flash;
becomes:
psk|1;hold|2;endcall|3;conf|4;xfer;bxfer;confLx;xferLx;
park;phold;flash
Click Submit All Changes. The Sales speed dial softkey is displayed in the lower
left of the IP phone screen when the phone is idle, when the phone is connected
on a call, and when the phone is off hook.
You can configure the message waiting indicator (MWI) for separate extensions on
the phone. The MWI lights based on the presence of new voicemail messages in
the mailbox.
To enable the indicator at the top of your Cisco SPA300 Series or Cisco SPA500
Series IP phone to light when voice mail is left, or on a Cisco WIP310 display a
seeing message waiting notification, navigate to Admin Login > advanced >
Voice > Ext_n. Under Call Feature Settings in the Message Waiting list, choose yes
to enable.
| 1 to PSK1. For example, the original string:
3
67