Cisco 521SG - Unified IP Phone VoIP Administration Manual page 172

Provisioning
Using TR-069
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Field Description
TR-069 From the drop-down menu, select yes to initialize all voice
VoiceObject Init objects to factory default values. Enter no to retain the
current values.
TR-069 DHCP From the drop-down menu, select yes to initialize the DHCP
Option Init settings from the ACS. Enter no to leave the settings
unchanged.
TR-069 IGD From the drop-down menu, select yes to enable TR-069 on
Support the Internet Gateway Device (IGD). Enter no to disable
traceability. (This is used for debugging purposes.)
TR-069 Fallback From the drop-down menu, select yes to enable TR-069
Support fallback support. Enter no to disable fallback support. If the
SPA phone first attempt to discover the ACS by using DHCP,
it attempts to use DNS to resolve ACS IP address.
TR-069 DHCP Enter the interval in seconds that the phone should poll the
Inform Timer DHCP server.
BACKUP ACS Enter the backup URL of the ACS using the CPE WAN
URL Management Protocol. This parameter must be in the form
of a valid HTTP or HTTPS URL. The host portion of this URL
is used by the CPE to validate the ACS certificate when
using SSL or TLS.
BACKUP ACS Enter the backup username that authenticates the CPE to
User the ACS by using the CPE WAN Management Protocol. This
username is used only for HTTP-based authentication of the
CPE.
BACKUP ACS Enter the backup password grants access to the ACS for
Password the backup user. This password is used only for HTTP-
based authentication of the CPE.
6
171