Configure The Web Server From The Phone Screen Interface; Direct Action Url - Cisco 6800 Series Administration Manual

Phone Administration

Configure the Web Server from the Phone Screen Interface

Use this procedure to enable the phone web user interface from the phone screen.
Procedure
Step 1 Press Applications
Step 2
Select Network configuration > Web Server.
Step 3 Select On to enable or Off to disable.
Step 4
Press Set.

Direct Action URL

If the Enable Direct Action URL setting is set to "Yes ", these Direct action URLs are accessible only for the
admin. If Admin user is password protected, the client provides a login prompt before these are accessed. The
Direct Action URLs are accessible via the phone web page via the path /admin/<direct_action>. The
syntax is:
http[s]://<ip_or_hostname>/admin/<direct_action>[?<url>]
For example, http://10.1.1.1/admin/resync?http://server_path/config.xml
The following table provides a list of the different direct action URLs that are supported.
direct_action Description
resync Initiates a one-time resync of the config file specified by URL. The URL to resync is provided by appending
? followed by the URL. The URL specified here will not be saved anywhere in the phone settings.
Example
http://10.1.1.1/admin/resync?http://my_provision_server.com/cfg/device.cfg
upgrade Initiates an upgrade of a phone to the specified load. The load is specified via the upgrade rule. the rule
is specified by appending ? followed by URL path to the load. The upgrade rule specified is one time
only and will not be saved in any property setting.
Example
http://10.1.1.1/admin/upgrade?http://my_upgrade_server.com/loads/sip88xx.11.0.0MP2.123.loads
updateca Initiates a one-time install of the Custom Certificate Authority (Custom CA) specified by the URL. The
URL to download is provided by appending ? followed by the URL. The URL specified here will not be
saved anywhere in the phone settings.
Example
http://10.1.1.1/admin/updateca?http://my_cert_server.com/certs/myCompanyCA.pem
.
Cisco IP Phone 6800 Series Multiplatform Phones Administration Guide
Configure the Web Server from the Phone Screen Interface
139