Assign A Ring Tone With The Phone Web Page; Turn On Dnd From The Phone Web Page; Configure The Screen Saver With The Phone Web Interface - Cisco 8832 User Manual

Assign a Ring Tone with the Phone Web Page

After you enable any of the call forward services, the Forward or Forward all softkey changes to the Clr
fwd or Clf fwd all respectively. You can press the softkey to disable the call forward service or services,
while the target phone number still remains.
Clf fwd all disables only the Call Forward All service, Clf fwd disables all call forward services.
If the call forward settings on the phone don't take effect, consult your administrator.

Assign a Ring Tone with the Phone Web Page

Procedure
Step 1 On the phone web page, select User Login > Voice > Ext(n), where (n) is the number of an extension.
Step 2
In Call Feature Settings area, choose a ringtone from the Default Ring drop-down list.
If you don't want to specify a ringtone for the phone line, choose No ring. Your phone doesn't ring when
receiving an incoming call.
Step 3
Click Submit All Changes.

Turn on DND from the Phone Web Page

Procedure
Step 1 On the phone web page, select User Login > Voice > User.
Step 2 Under Supplementary Services, set DND Settings to Yes.
You can turn on DND on for all lines if your administrator hasn't enabled feature key sync (FKS).
Step 3
Click Submit All Changes.

Configure the Screen Saver with the Phone Web Interface

You can configure a screen saver for the phone. When the phone is idle for a specified time, it enters screen
saver mode.
Any button press returns the phone to normal mode.
Cisco IP Conference Phone 8832 Multiplatform Phone User Guide
82
Settings