Nec 32X Cd-Rom Drive Jumper Settings; Lucky Goldstar 32X Cd-Rom Drive Jumper Settings; Lite-On 32X Cd-Rom Drive Jumper Settings - NEC POWERMATE 8100 Series Service And Reference Manual

NEC 32X CD-ROM Drive Jumper Settings

The factory settings for the jumpers on the NEC 32X CD-ROM drive are shown
in the following table. The drive is set as the master device on the secondary
channel. Specifications for the CD-ROM drive are included in Section 10.
Jumper
Cable Select (CS)
Slave Present (SL)
Master Select (MA)

Lucky Goldstar 32X CD-ROM Drive Jumper Settings

The factory settings for the jumpers on the Lucky Goldstar 32X CD-ROM drive
are shown in the following table. The drive is set as the master device on the
secondary channel. Specifications for the CD-ROM drive are included in
Section 10.
Jumper
Cable Select (CS)
Slave Present (SL)
Master Select (MA)

Lite-ON 32X CD-ROM Drive Jumper Settings

The factory settings for the jumpers on the Lite-ON 32X CD-ROM drive are
shown in the following table. The drive is set as the master device on the
secondary channel. Specifications for the CD-ROM drive are included in
Section 10.
Jumper
Cable Select (CS)
Slave Present (SL)
Master Select (MA)
2-8 System Configuration
NEC 32X CD-ROM Drive Jumper Settings
Lucky Goldstar 32X CD-ROM Drive Jumper Settings
Lite-ON 32X CD-ROM Drive Jumper Settings
Jumper Pin Settings
Not used.
Disabled, pin 2 open (factory default).
Enabled, pin 2 jumpered.
Enabled, pin 3 jumpered (factory default).
Disabled, pin 3 open.
Jumper Pin Settings
Disabled, pins open (factory default).
Enabled, pins jumpered.
Disabled, pins open (factory default).
Enabled, pins jumpered.
Enabled, pins jumpered (factory default).
Disabled, pins open.
Jumper Pin Settings
Not used.
Disabled, unjumpered (factory default).
Enabled, jumpered.
Enabled, jumpered (factory default).
Disabled, unjumpered.