Table of Contents
Advertisement
The following figure shows the device slot locations.
3 1/2-Inch Slot
(contains 1.44-MB
diskette drive)
3 1/2-Inch
Internal Slot
(contains hard disk in
hard disk
Preparing the Device
Before installing a storage device in the system, follow any
preinstallation instructions that come with the device. For
example, check the following:
Diskette drive
diskette drive. See the documentation that comes with
the drive.
IDE device
before installing it. See the documentation that comes
with the device for jumper setting information.
An IDE device, such as an IDE hard disk or IDE CD-
ROM reader, must be set correctly as the first (master)
or second (slave) device on the IDE channel.
*Top 5 1/4-inch slot is unavailable in some configurations.
remove any termination on the optional
check the jumper settings on the device
5 1/4-Inch
Accessible Slots*
Locating device slots
Installing Options 3-29
Advertisement
Table of Contents
