Preparing The Device - NEC Direction SP User Manual

Preparing the Device

Before installing a storage device in the system, follow any
preinstallation instructions that come with the device. For
example, check the following:
T
Diskette drive
optional diskette drive. See the documentation included
with the drive.
T
IDE device
before installing it. See the documentation that comes
with the device for jumper setting information.
5-18 Installing Options
remove any termination jumpers on the
check the jumper settings on the device
An IDE device, such as an IDE hard drive or IDE
CD-ROM drive, must be set correctly as the first
(master) or second (slave) device on the IDE
channel.
Locating device slots