Removing A 5.25-Inch Device - NEC POWERMATE PRO150 Manual

Removing a 5.25-inch Device

1. Observe the precautions in "Before You Begin."
2. Remove the bezel.
3. Disconnect the power and data cables attached to the device.
4. While squeezing the protruding plastic snap-in rails attached to the
device towards each other (Figure 4-13), carefully slide the device out of
the bay.
5. Replace the snap-in EMI shield.
6. Replace the filler panel and secure it to the bezel with two screws.
7. Replace the bezel.
PowerMate Pro150 System
4-23