NEC POWERMATE PRO150 Manual page 114

Error Message
Off Board Parity Error
Slave DMA Controller Error
Slave Interrupt Controller Error
System Memory Size Mismatch
Timer Channel 2 Error
6-14
Explanation
Parity error in memory installed in an
expansion slot. The format is:
OFF BOARD PARITY ERROR ADDR (HEX)
= (XXXX)
XXXX is the hex address where the error
occurred.
Error in the slave DMA channel.
Slave Interrupt Controller failed during
POST.
The amount of memory on the system
board is different than the amount in CMOS
RAM. Check for mismatched SIMM sizes.
(All SIMMs must be the same size.) Run
Setup.
Most systems include two timers. There is
an error in timer 2.
Solving Problems