Configuration Mode; Pci Ide Interface; Floppy Interface; Serial Port 1 Address - NEC POWERMATE PRO150 Manual

Configuration Mode

Enables you to choose between setting the peripheral configuration yourself,
or having the system do it. The options are Auto and Manual. The default
is Auto.
When Auto is selected, the system peripherals are automatically configured
during power up. The options below for PCI IDE Interface, Floppy
Interface, Serial Port 1 and Serial Port 2 Addresses, Serial Port 2 IR Mode,
and the Parallel Port Address cannot be modified. The settings displayed
for those options reflect the current state of the hardware.

PCI IDE Interface

Enables or disables the PCI IDE hard disk interface. The options are
Enabled and Disabled. The default is Enabled. (If Configuration Mode is
set to Auto, this option cannot be modified.)

Floppy Interface

Enables or disables the diskette drive interface. The options are Enabled
and Disabled. The default is Enabled. (If Configuration Mode is set to
Auto, this option cannot be modified.)

Serial Port 1 Address

Selects the address and IRQ of serial port 1. The options are Disabled;
COM1, 3F8h, IRQ4; COM3, 3E8h, IRQ4; and COM4, 2E8h, IRQ3. The
default is COM1, 3F8h, IRQ4. If the Configuration Mode is set to Auto, the
Setup program assigns the first free COM port (normally COM1, 3F8h,
IRQ4) as the serial port 1 address and IRQ, regardless of what is selected
under the Serial Port 1 Address option. (If Configuration Mode is set to
Auto, this option cannot be modified.)

Serial Port 2 Address

Selects the address and IRQ of serial port 2. The options are Disabled;
COM2, 2F8h, IRQ3; COM3, 3E8h, IRQ4; and COM4, 2E8h, IRQ3. The
default is COM2, 2F8h, IRQ3. If the Configuration Mode is set to Auto, the
Setup program assigns the first free COM port (normally COM2, 2F8h,
IRQ3) as the serial port 2 address and IRQ, regardless of what is selected
under the Serial Port 2 Address option. (If Configuration Mode is set to
Auto, this option cannot be modified.)
PowerMate Pro150 System
3-11