Error And Information Messages - NEC POWERMATE PRO150 Manual

Error and Information Messages

Error Message
Address Line Short!
Cache Memory Failure, Do Not Enable
Cache!
CMOS Battery Failed
CMOS Checksum InvaIid
CMOS System Options Not Set
CMOS Time and Date Not Set
Diskette Boot Failure
DMA Controller Error
Drive Not Ready Error
6-12
Explanation
Error in the address decoding circuitry on
the motherboard.
Cache memory is defective; the CPU has
failed. Call for service.
CMOS RAM is powered by a battery. The
battery power is low. Replace the battery.
After CMOS RAM values are saved, a
checksum value is generated for error
checking. The previous value is different
from the current value. Run Setup.
The values stored in CMOS RAM are either
corrupt or nonexistent. Run Setup.
Run Setup to set the date and time in
CMOS RAM.
The boot disk in floppy drive A: is corrupt. It
cannot be used to boot the system. Use
another boot disk and follow the screen
instructions.
Error in the DMA Controller.
The BIOS cannot access the floppy drive.
Check all the appropriate connections after
the system is powered down.
Continued
Solving Problems