Isa Shared Memory Base Address; Irq 5, 9, 10, 11 - NEC POWERMATE PRO150 Manual

ISA Shared Memory Base Address

Sets the base address for the ISA Shared Memory. The options are C8000h,
CC000h, D0000h, D4000h, D8000h, and DC000h. The default is C8000h.
This setting could affect the ISA Shared Memory Size item. The value
entered in the ISA Shared Memory Size item cannot extend to the E0000h
address. For example, if a size of 64K was selected, options D4000h,
D8000h, and DC000h will not be available.

IRQ 5, 9, 10, 11

Sets the status of the IRQ. The options are Available and Used By ISA Card.
The default is Available. The PCI auto-configuration code looks here to see
if these interrupts are available for use by a PCI add-in board. If an
interrupt is available, the PCI auto-configuration code can assign the
interrupt to be used by the system. If your system contains an ISA add-in
card that uses one of these interrupts, select Used By ISA Card for that
interrupt.
Note
IRQs 5, 9, 10, and 11 are the default user available IRQs.
Depending on your configuration, this screen might show
more interrupts than those listed here. If you have disabled
the parallel port or either of the serial ports, or have not
installed a PS/2 mouse, more IRQs will be available. See
Chapter 7 for information on reserved and available IRQs.
PowerMate Pro150 System
3-15