Setting Up Drives - NEC POWERMATE PRO150 Manual

Setting Up Drives

See Chapter 4 for information about physically installing a drive. The Setup
program (Chapter 3) includes information about the drive types installed. If
you install an IDE hard disk drive, you do not have to run Setup. The
system BIOS automatically configures IDE drives during the boot up
process. If you are installing a non-IDE hard disk drive, see the
manufacturer's instructions and Chapter 3 in this manual for information
about specifying your drive.
Note
The hard disk drive comes installed in the system. You
must install an operating system.
PowerMate Pro150 System
2-9