Table of Contents
Advertisement
Power Supply Specifications
Following are the specifications for the power supply.
!
WARNING
To avoid damage to the system board or power supply, do
not exceed a total of 180 watts of continuous power draw,
or a 200 watt surge for a maximum of 12 seconds. Do not
overload the system board by installing add-in boards
that draw excessive current. The system is designed to
provide 2 A of + 5 V current for each add-in board in the
system. The total + 5 V current draw for add-in boards in
a fully-loaded system (all six add-in board slots filled)
must not exceed 12 A.
AC Input
Voltage
(Input frequency 50/60 Hz)
115 V (100 120 V)
230 V (200 240 V)
Power Supply Output
DC Voltage
+12 V
+5 V
+3.3 V
-5 V
-12 V
Note
Due to load sharing among the power supply outputs, the
maximum continuous current outputs of all voltages cannot
be achieved simultaneously.
7-2
Current
4.0 A
2.0 A
Current
(Maximum Continuous)
6.0 A
22.0 A
14.0 A
0.5 A
0.8 A
Technical Reference
Advertisement
Table of Contents
