Checking The Input Voltage Setting; Check The Input Voltage Setting - NEC POWERMATE PRO150 Manual

Checking the Input Voltage Setting

The power supply provides power for onboard resources, add-in boards,
and drives. A switch on the system back panel (Figure 2-1) can be used to
set the power supply to operate at:
115 V ac (in the range of 100-120 V ac), or
230 V ac (in the range of 200-240 V ac)
To verify that your system has the correct setting for your environment,
check the input power selection switch. For power supply output ratings,
see Chapter 7.
Figure 2-1. Check the Input Voltage Setting
PowerMate Pro150 System
OM04193
2-3