Table of Contents
Advertisement
The first part of this chapter helps you identify and solve problems that
might occur when the system is in use. The second part lists error code
messages that might display.
Resetting the System
There are two ways to reset the system:
Press <Ctrl + Alt + Del>
Cycle the system power. To do this:
1. Press the power on/off button to turn off system power.
2. Wait at least 20 seconds.
3. Press the power on/off button to turn on system power. The
system powers up and immediately begins the power-on self test
(POST).
Resetting the system:
Clears the system memory
Restarts the power-on self test (POST)
Reinitializes all peripherals
Loads the operating system
PowerMate Pro150 System
Solving Problems
6
6-1
Advertisement
Table of Contents
Need help?
Do you have a question about the POWERMATE PRO150 and is the answer not in the manual?
Questions and answers