Auto System Rebooting - SMC Networks 7824M/VSW - annexe 1 Manual

CLI
4.1.10.2
46

Auto System Rebooting

The switch reboots the system according to user's configuration. There are two basis for
system rebooting. These are CPU and memory. CPU is rebooted in case CPU Load or In-
terrupt Load continues for the configured time. Memory is automatically rebooted in case
memory low occurs as the configured times.
To enable the auto system rebooting, use the following command.
Command
auto-reset cpu <50-100> <1-100>
TIME
auto-reset memory <1-120> <1-
10>
no auto-reset {cpu | memory}
To display a current configured auto system rebooting, use the following command.
Command
show auto-reset cpu
show auto-reset memory
Mode
Configures the system to restart automatically in case
an average of CPU or interrupt load exceeds the con-
figured value during the user-defined time.
50-100: average of CPU load
1-100: average of interrupt load
Bridge
Configures the system to restart automatically in case
memory low occurs as the configured value.
1-120: time of memory low
1-10: count of memory low
Disables auto system rebooting.
Mode
Shows a current configured auto system rebooting by
Enable
CPU.
Global
Shows a current configured auto system rebooting by
Bridge
system memory.
Management Guide
TigerAccess™ EE
Description
Description
SMC7824M/VSW