Table of Contents
Advertisement
Management Guide
TigerAccess™ EE
4.1.5
SMC7824M/VSW
Login Password Recovery Process
To upgrade the system software in the boot mode, perform the following step-by-step in-
struction:
Step 1
After the switch is manually restarted, "Start Address:
shown up.
Step 2
Keep on pressing [Space Bar] key until "console=ttyS0,9600 root=/dev/ram rw"
is shown up on the screen.
Step 3
Enter "password" next to "console=ttyS0,9600 root=/dev/ram rw".
Step 4
Check "password restore to default..." on the booting messages. It means that
the current password returns to the default setting.
Step 4
Check "password restore to default..." on the booting messages. It means that
the current password returns to the default setting. By default setting, the password is
configured as nsn-switch.
************************************************************
*
*
*
*
************************************************************
Press 's' key to go to Boot Mode: 0
Load Address:
0x01000000
Image Size:
0x00bac000
Start Address: 0x01000000
console=ttyS0,9600 root=/dev/ram rw password
NOS version 5.01
CPU : MPC8245 at 264 MHz
Total Memory Size : 256 MB
Calibrating delay loop... 175.71 BogoMIPS
INIT: version 2.85 booting
Extracting configuration
password restore to default...
Fri, 03 Nov 2006 14:10:00 +0000
INIT: Entering runlevel: 3
INIT: Start UP
Password:
Boot Loader Version 5.43
SMC Networks Inc.
0x010000000" will be
*
*
*
*
Step 1
Step 2
Step 3
Step 4
CLI
39
Advertisement
Table of Contents
