Snmp View Record; Permission To Access Snmp View Record - SMC Networks 7824M/VSW - annexe 1 Manual

CLI
7.1.5
7.1.6
138

SNMP View Record

You can create an SNMP view record to limit access to MIB objects with object identity
(OID) by an SNMP manager.
To configure an SNMP view record, use the following command.
Command
snmp view VIEW {included |
excluded} OID [MASK]
no snmp view VIEW [OID]
To display a created SNMP view record, use the following command.
Command
show snmp view
The following is an example of creating an SNMP view record.
SWITCH(config)# snmp view TEST included 410
SWITCH(config)# show snmp view
View List
ViewName Type
-------------------------------------------
TEST included 410
SWITCH(config)#

Permission to Access SNMP View Record

To grant an SNMP group to access to a specific SNMP view record, use the following
command.
Command
snmp access GROUP {v1 | v2c}
READ-VIEW WRITE-VIEW NO-
TIFY-VIEW
snmp access GROUP v3 {no-
auth | auth | priv} READ-VIEW
WRITE-VIEW NOTIFY-VIEW
no snmp access GROUP
Mode
Creates an SNMP view record.
VIEW: view record name
included: includes a sub-tree.
excluded: excludes a sub-tree.
Global
OID: OID number
Deletes a created SNMP view record.
VIEW: view record name
Mode
Enable
Global Shows a created SNMP view record.
Bridge
SubTree / Mask
Mode
Grants an SNMP group to access a specific SNMP
view record.
GROUP: group name
Grants an SNMP version 3 group to access a specific
Global
SNMP view record.
GROUP: group name
Deletes a granted SNMP group to access a specific
SNMP view record.
Management Guide
TigerAccess™ EE
Description
Description
Description
SMC7824M/VSW