Table of Contents
Advertisement
CLI
8.3.6.5
8.3.6.6
272
Link Type
A port that operates in full-duplex is assumed to be point-to-point link type, while a half-
duplex is considered as a shared port. .
To configure the link type of port, use the following command.
Command
spanning-tree port PORTS link-
type { point-to-point | shared }
To delete a configured link type of port, use the following command.
Command
no spanning-tree port PORTS link-type
Displaying Configuration
To display the configurations of STP, use the following command.
Command
show spanning-tree
show spanning-tree active [ detail ]
show spanning-tree blockedport
show spanning-tree detail [ active ]
show spanning-tree inconsistentports
show spanning-tree bridge [{ address | detail |
forward-time | hello-time | id | max-age | proto-
col | priority [ system-id ] }]
show spanning-tree root [{ address | cost |
detail | forward-time | hello-time | id | max-age |
port | priority [ system-id ] }]
show spanning-tree port PORTS [{ active [ de-
tail ] | cost | detail [ active ] | edgeport | inconsis-
tency | rootcost | state | priority }]
show spanning-tree summary [ totals ]
Mode
Specifies a link-type for a designated port
PORTS: port number
Bridge
point-to-point: full-duplex
shared: half-duplex
Mode
Bridge
Mode
Enable
Global
Bridge
Bridge
Management Guide
TigerAccess™ EE
Description
Description
Deletes a configured link type.
Description
Shows all configurations of STP
Shows STP information on active inter-
face:
detail: detailed STP information (as
option).
Shows information of the blocked ports
Shows detailed information of STP.
Shows information of root-inconsistency
state.
Shows information of the bridge status
and configuration
Shows the status and configuration for
the root bridge.
Shows STP information of specified
port.
Shows a summary of STP:
totals: the total lines of STP
SMC7824M/VSW
Advertisement
Table of Contents
