CLI
8.6.9
8.6.9.1
8.6.9.2
8.6.9.3
8.6.9.4
334
DHCP Client
An interface of the switch can be configured as a DHCP client, which can obtain an IP
address from a DHCP server. The configurable DHCP client functionality allows a DHCP
client to use a user-specified client ID, class ID or suggested lease time when requesting
an IP address from a DHCP server. Once configured as a DHCP client, the switch cannot
be configured as a DHCP server or relay agent.
Enabling DHCP Client
To configure an interface as a DHCP client, use the following command.
Command
ip address dhcp
no ip address dhcp
DHCP Client ID
To specify a client ID, use the following command.
Command
ip dhcp client client-id hex HEXSTRING
ip dhcp client client-id text STRING
no ip dhcp client client-id
DHCP Class ID
To specify a class ID, use the following command.
Command
ip dhcp client class-id hex HEXSTRING
ip dhcp client class-id text STRING
no ip dhcp client class-id
Host Name
To specify a host name, use the following command.
Command
ip dhcp client host-name NAME
no ip dhcp client host-name
Mode
Enables a DHCP client on an interface.
Interface
Disables a DHCP client.
Mode
Interface
Mode
Interface
Mode
Specifies a host name.
Interface
Deletes a specified host name.
Management Guide
TigerAccess™ EE
Description
Description
Specifies a client ID.
Deletes a specified client ID.
Description
Specifies a class ID.
(default: system MAC address)
Deletes a specified class ID.
Description
SMC7824M/VSW