SMC Networks 7824M/VSW - annexe 1 Manual page 43

CLI
42
The commands starting with the same character are applied by inputting only the starting
commands. For example, if you input show, all the commands starting with show are
applied. To delete a configured security level, use the following command.
Command
no privilege
no privilege view level <0-15> {COMMAND | all}
no privilege enable level <0-15> {COMMAND |
all}
no privilege configure level <0-15> {COM-
MAND | all}
no privilege interface level <0-15> {COMMAND
| all}
no privilege {flow | policer | policy} level <0-
15> {COMMAND | all}
no privilege bridge level <0-15> {COMMAND |
all}
no privilege rmon-alarm level <0-15> {COM-
MAND | all}
no privilege rmon-event level <0-15> {COM-
MAND | all}
no privilege rmon-history level <0-15> {COM-
MAND | all}
no privilege dhcp-pool level <0-15> {COM-
MAND | all}
no privilege dhcp-pool-class level <0-15>
{COMMAND | all}
no privilege dhcp-option82
{COMMAND | all}
no privilege dhcp-class level <0-15> {COM-
MAND | all}
To display a configured security level, use the following command.
Command
show privilege
show privilege now
The following is an example of creating the system account test0 having a security level
10 and test1 having a security level 1 with no password.
SWITCH(config)# user add test0 level 0 level0user
Changing password for test0
Enter the new password (minimum of 5, maximum of 8 characters)
Please use a combination of upper and lower case letters and numbers.
Mode
Global
level <0-15>
Mode
Enable Shows a configured security level.
Global
Shows a security level of current mode.
Bridge
Management Guide
TigerAccess™ EE
Description
Deletes all configured security lev-
els.
Delete a configured security level on
each mode.
Description
SMC7824M/VSW